PDA

View Full Version : Tow bar fitting



Adge
Sunday 11th June 2006, 22:00
Any tips/hints/instructions on how to fit tow bar to !998 C70 gratefully received.

the_boy
Sunday 11th June 2006, 22:29
Here's a tip..... don't :uglyhamme

What are you wanting to tow?

Adge
Monday 12th June 2006, 10:52
Re what am I towing-just a small trailer.
Was the "Don't" because of extra weight, or other problems?

siamblue
Tuesday 13th June 2006, 09:26
adge you need to take the rear bumper off first, then fit the 2 smaller plates behind the bumper brackets, then the rest of it fits on the chassis rails, once the bumper is off it is self explainitory,

Gary,

as for the wiring i haven't a clue,

Adge
Tuesday 13th June 2006, 20:38
Thanks Gary.
Will have a look!
Harry

MidLifeCrisis
Tuesday 20th June 2006, 13:05
If not too late try

www.fittinginstructions.co.uk

With regard to electrics, C70s have trailer wiring harnesses located behind right hand boot liner. I'll try and find a wiring diagram!

Tony

MidLifeCrisis
Tuesday 20th June 2006, 13:39
Please confirm with Multimeter before commiting yourself!!!!

VOLVO C70 Trailer wiring TRAILER 12N

Connector A
PIN 1. GRN.........LEFT TURN........................YEL
PIN 2. BLU/GRN.....RIGHT TURN.......................GRN
PIN 3. YEL.........BRAKE LIGHT......................RED
PIN 4. WHT.........REAR LIGHTS......................BWN and BLK
PIN 5. GRY.........SPARE
PIN 6. BLK.........EARTH............................WHT

Connector B
PIN 1. GRY/RED.....SPARE
PIN 2. BLU/YEL.....SPARE
PIN 3. BLU.........REVERSE LIGHTS...................YEL (12S)
PIN 4. VIO/WHT.....FOG LIGHTS.......................BLU
PIN 5. VIO.........FOG LIGHTS (Looped with pin 4)
PIN 6. BLK.........EARTH............................WHT

Hope this helps

Tony.

Adge
Tuesday 20th June 2006, 19:08
Thanks for that Tony.
Will look at suggested site. Much appreciated.
Harry